Licensed & Insured, in San Diego and surrounding areas. Metal Roof Installation · Standing Seam Metal Roofing · Metal Roof Replacement.
Your Free Quote Request
All your work handled by qualified professionals in San Diego
Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.
Included in your service
Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.
Included in your service
Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.
Included in your service
Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.
Included in your service
Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.
Included in your service
Priority leak response: we trace the leak to its real source instead of caulking the symptom.
Included in your service
The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.
Included in your service
Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.
Included in your service
The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.
Included in your service
Steel strength under a textured stone finish, with strong hail and wind performance.
Included in your service
Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.
Included in your service
Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.
Included in your service
Flashing is the number one leak point on any metal roof, and it is what we fabricate best.
Included in your service
Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.
Included in your service
Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.
Included in your service
A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.
Included in your service
Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.
Included in your service
Barns, workshops, churches, and light commercial metal roofing across the county.
Included in your service
Reach us by phone at (619) 314-6401 or fill out the estimate form. We get back to you within 24 hours, no commitment required.
Our Metal Roofing Contractor visits your property, evaluates the project, and provides a written quote before any work begins.
Our crew completes the metal roofing and leaves your property clean and tidy. Full cleanup is included.
Continuous training, professional equipment, meticulous and code-compliant work
Full coverage on all our job sites, no exceptions
Emergencies, weekends, holidays: available when you need us
Response within 24h, no commitment, by phone or form
Available Mon-Sun 7am-7pm
We serve in San Diego and surrounding areas · On-site visits included · Free estimate within 24h
San Diego Metal Roofing is a team of local certified professionals based in San Diego. We respond quickly in San Diego and surrounding areas with professional equipment suited to every job.
Free estimate, transparent pricing, no subcontracting. Tell us about your roof. We'll handle the rest.
📞 Call (619) 314-6401⭐⭐⭐⭐⭐ 4.9/5 · 232 verified Google reviews
“Had them put up a metal roof on our equipment hangar out in the rural part of the county, roughly 3,000 square feet of corrugated panel. Crew of four knocked it out in about a week and a half, and the site was spotless when they left. Way sturdier than I expected for the price.”
Commercial Metal Roofing
“We wanted to refresh the front entry of our Mediterranean-style house without tearing everything apart, and they did a metal roof-over-shingles retrofit on that section. The finish matches the stucco and tile look perfectly. Honestly relieved we didn't have to deal with a full tear-off.”
Metal Roof Over Shingles (Retrofit)
“They built out a metal roof for our horse shelter, about 24 feet long with ribbed panels. Solid work, fair price, and the horses are finally out of the sun. Only gripe is they were a couple days late starting, but once they showed up it was quick.”
Agricultural Metal Roofing
“Full standing seam install on our house and I could not be happier. The crew of five was in and out in four days, and the seams are dead straight. Neighbors have already asked for their number.”
Metal Roof Installation
“They came out to fix a ventilation issue on our metal roof that two other companies couldn't figure out. Turns out the flashing around the vent stack was the culprit. Fast, honest, and didn't try to upsell me on a whole new roof.”
Metal Roof Repair
“Replaced our old failing roof with a new metal one and the difference is night and day. They hauled off every bit of the old material and swept the driveway clean. Took about two weeks total, which felt reasonable for the size of the house.”
Metal Roof Replacement
“We went with standing seam for our place up on the hill with the ocean view, and it looks incredible, the clean lines really suit the house. What surprised me most was how quiet the crew was and how carefully they protected the landscaping. Worth every penny.”
Standing Seam Metal Roofing
“Had them do a metal shingle roof to replace our old clay tile look. The color match is spot-on and you honestly can't tell it isn't real tile from the street. Small scheduling hiccup at the start, but the finished job speaks for itself.”
Metal Shingle RoofingReal photos of our work in San Diego · Each image shows the final result achieved for our clients
Indicative estimates: your free personalized quote is always exact
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Exposed-fastener panel install | Starting at $8/sq ft | Includes tear-off, underlayment, R-panel or corrugated and standard flashing on simple roofs |
| Standing seam install | Starting at $14/sq ft | Includes concealed clips, high-temp underlayment, fabricated flashing and coastal-grade finish options |
| Stone-coated steel install | Starting at $12/sq ft | Includes tile or shake profile panels, underlayment and flashing, priced by roof complexity |
| Metal roof over shingles (retrofit) | Starting at $9/sq ft | Includes framing adjustments, underlayment and panels over one existing shingle layer |
| Complex or large-scale job | On estimate | Multi-level, steep pitch, dormers and heavy flashing work need an on-site look first |
| Estimate | Free | Response within 24h at (619) 314-6401, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Snap-lock standing seam install | Starting at $10/sq ft | Includes tear-off, underlayment, concealed clips, and standard flashing on a simple residential roof. |
| Mechanically seamed install | Starting at $13/sq ft | Adds powered seaming and heavier clip pattern for exposed coastal roofs and high-wind sites. |
| Coastal-grade coated panels | Starting at $15/sq ft | Corrosion-resistant substrate and UV-stable paint for homes near the bay or surf line. |
| Complex or multi-plane roof | On estimate | Hips, valleys, chimneys, and multi-story access require an on-site measurement before pricing. |
| Travel | Included | in San Diego and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (619) 314-6401, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Exposed-fastener panel replacement | Starting at $9/sq ft | Includes tear-off, new underlayment, and R-panel or corrugated install; roof pitch and access move the price. |
| Stone-coated steel replacement | Starting at $13/sq ft | Includes tear-off, decking repair, and tile or shake profile panels; HOA design review can add time. |
| Standing seam replacement | Starting at $16/sq ft | Includes concealed-fastener panels and coastal-grade finish; panel length and hillside staging raise the cost. |
| Copper and specialty replacement | On estimate | Copper and accent metal pricing depends on roof area, detailing, and material market price at order time. |
| Travel | Included | in San Diego and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (619) 314-6401, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Stone-coated steel retrofit over existing shingles | Starting at $7/sq ft | Includes underlayment over old shingles, new flashing at penetrations, and standard color options. |
| Standing seam retrofit on battens | Starting at $11/sq ft | Concealed fasteners, batten system, and premium coastal-grade finish for low-pitch roofs. |
| Exposed-fastener panel retrofit (barns and outbuildings) | Starting at $5.50/sq ft | R-panel or corrugated over existing shingles, with screws and closure strips included. |
| Complex roof with multiple valleys, chimneys, or skylights | On estimate | Flashing and penetration work drives the number, so we need an on-site look first. |
| Travel | Included | in San Diego and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (619) 314-6401, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Minor repair (reseal, fasteners, small flashing) | Starting at $450 | Covers up to a small number of penetrations, resealing and fastener replacement, with access and roof pitch as the main cost drivers. |
| Panel replacement (single panel) | Starting at $850 | Includes removal and replacement of one damaged panel with matching material, new closures and fasteners, priced by panel type and height. |
| Leak diagnosis and repair | Starting at $650 | Includes water testing, attic inspection and repair of the confirmed entry point, with active leaks and difficult access moving the price up. |
| Flashing rebuild (chimney, skylight, valley) | Starting at $900 | Includes removal of failed flashing and installation of new metal flashing tied into the panel, priced by location and roof complexity. |
| Complex or large-scale job | On estimate | Multiple panels, widespread corrosion or storm damage across the roof need an on-site inspection before a number is given. |
| Estimate | Free | Response within 24 hours at (619) 314-6401, no obligation to book the repair. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Single leak point repair | Starting at $450 | Diagnosis, repair of one entry point, and water re-test before we leave |
| Fastener and washer replacement | Starting at $650 | Corroded screws pulled and re-set with new sealing washers across the affected plane |
| Flashing or pipe boot rebuild | Starting at $550 | New metal flashing and underlayment lap at chimneys, skylights, or stucco transitions |
| Multiple leak points or large area | On estimate | Widespread fastener failure or hidden deck damage needs an on-site look before quoting |
| Travel | Included | in San Diego and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (619) 314-6401, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Targeted screw replacement | Starting at $750 | Covers inspection and replacement of a limited number of failed fasteners on an accessible roof |
| Full-field re-fastening | Starting at $1,450 | Replaces every fastener across the panel field, priced by screw count and roof pitch |
| Coastal corrosion upgrade | Starting at $950 | Includes corrosion-resistant washers and oversized screws for salt-exposed roofs near the coast |
| Complex or large-scale job | On estimate | Steep pitch, tall roofs, solar arrays or heavy corrosion need an on-site look first |
| Travel | Included | in San Diego and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (619) 314-6401, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Corrugated panel install | Starting at $5.50/sq ft | Standard corrugated panels with fasteners and closures on sound framing; access and roof pitch move the price. |
| R-panel (ribbed) install | Starting at $6.50/sq ft | Deeper-rib panels for longer spans; panel length and purlin condition are the main cost drivers. |
| 5V crimp install | Starting at $7.00/sq ft | Traditional narrow-rib profile with trim and closures; steep pitches and cut-up roofs raise the rate. |
| Re-panel over existing purlins | On estimate | Old panels come off and new ones go down; framing damage and disposal volume need an on-site look. |
| Travel | Included | In San Diego and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (619) 314-6401, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Metal shingle roof replacement | Starting at $9/sq ft | Includes tear-off, underlayment, metal shingles, and standard flashing; roof complexity and profile move the price |
| Retrofit over existing shingles | Starting at $7/sq ft | Includes surface prep and metal shingle install where code allows; existing layer count and deck condition affect cost |
| Premium profile (shake, slate, tile) | Starting at $12/sq ft | Includes stamped steel shingles in premium profiles and coastal-grade finishes; color and profile availability drive the range |
| Repair or re-fastening | On estimate | We inspect the roof and scope damaged shingles, flashing, and fasteners before quoting a repair |
| Travel | Included | in San Diego and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (619) 314-6401, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Stone-coated steel installation, standard pitch | Starting at $9/sq ft | Includes panels, underlayment, standard flashing, and cleanup on an accessible roof; steeper pitch or cut-up roofs move the rate up. |
| Retrofit over existing shingles | Starting at $10/sq ft | Covers prep and panels over a sound single layer where code allows; multiple layers or deck repair add to the scope. |
| Full tear-off and replacement | Starting at $12/sq ft | Includes tear-off, disposal, deck inspection, new underlayment, and panels; tile tear-off and limited access raise the figure. |
| Coastal-grade finish package | Add 8 to 15% | Upgraded corrosion-resistant fasteners and finish for salt exposure near the coast; distance to the ocean sets the exact add. |
| Complex or large-scale job | On estimate | Steep pitches, historic or HOA review, and heavy flashing detail need an on-site look before a number is given. |
| Estimate | Free | Response within 24 hours at (619) 314-6401, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Copper accent roofing (porch, bay window, dormer) | Starting at $20/sq ft | Includes custom-fabricated copper pans, soldered seams and coastal-grade underlayment; complexity of the detail moves the price. |
| Full copper standing seam roof | Starting at $28/sq ft | Includes shop-fabricated pans, concealed or soldered seams and full flashing; roof pitch and valley count raise the figure. |
| Zinc or aluminum architectural roof | Starting at $22/sq ft | Includes coastal-grade panels, factory finish and trim; access on canyon or hillside lots adds labor. |
| Custom flashing, chimney caps and trim | On estimate | Scope depends on penetration count, roof access and whether the existing flashing can be reused or must be rebuilt. |
| Travel | Included | in San Diego and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (619) 314-6401, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Reflective coating, single-story roof | Starting at $2.50/sq ft | Includes wash, rust treatment, primer, and two finish coats on standard-pitch panels |
| Rust treatment and fastener replacement | Starting at $3.25/sq ft | Adds rust conversion and new fasteners where corrosion has compromised the original screws |
| Stone-coated steel or complex roof | On estimate | Tile profiles, multiple levels, and skylights need an on-site look before we quote |
| Travel | Included | In San Diego and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (619) 314-6401, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Single chimney counterflashing repair | Starting at $600 | Includes removal of failed metal, new bent counterflashing, and water test on one chimney. |
| Skylight flashing reseal or repair | Starting at $750 | Covers curb flashing correction and reseal on one skylight, with access and pitch affecting price. |
| Valley or step flashing replacement | Starting at $900 | New valley metal or step flashing on a defined run, priced by linear feet and roof material. |
| Skylight curb rebuild or multiple transitions | On estimate | Requires an on-site look because framing, underlayment, and roof material all affect scope. |
| Travel | Included | In San Diego and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (619) 314-6401, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Single entry or short eave run | Starting at $1,200 | One row of guards over a door or walkway, includes layout and sealing. |
| Full cabin roof, multiple rows | Starting at $2,800 | Staggered rows across the eave, priced by linear feet and pitch. |
| Snow rails and bar systems | Starting at $2,200 | Continuous rail install over entries and equipment, includes brackets and sealing. |
| Ice-dam edge protection | Starting at $1,600 | Eave membrane and drainage detailing for low-pitch metal over porches. |
| Complex or large-scale job | On estimate | Mountain access, steep pitch, multiple roof sections, or combined gutter work needs an on-site look. |
| Estimate | Free | Response within 24h at (619) 314-6401, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Storm damage inspection | Free | Full roof, fastener, and flashing inspection with photos and a written assessment, no obligation to book. |
| Minor wind repair | Starting at $350 | Re-securing lifted panels and replacing a small number of clips or fasteners, priced by roof access and pitch. |
| Panel and flashing repair | Starting at $850 | Targeted panel replacement plus flashing or valley repair, with material cost driven by profile and finish. |
| Widespread fastener or storm damage | On estimate | Large-scale re-fastening or deck repair needs an on-site look before we quote a number. |
| Emergency tarping | Starting at $450 | Temporary weatherproofing during an active storm, credited toward the permanent repair when you book it. |
| Travel | Included | in San Diego and surrounding areas, no separate call-out or mileage fee. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Standard residential inspection | Free estimate | Full roof walk, photo documentation, and written report with priority findings and remaining-life estimate. |
| Exposed-fastener and coastal roofs | Starting at $350 | Includes fastener torque testing and sample pulls, with cost rising for larger roofs and heavy salt corrosion. |
| Pre-sale or insurance report | Starting at $450 | Formal written report with photos and service-life assessment for buyers, agents, or insurance documentation. |
| Complex or large-scale roof | On estimate | Multi-plane, steep, or commercial roofs need an on-site look before we quote the inspection scope. |
| Travel | Included | in San Diego and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (619) 314-6401, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Seamless aluminum gutter, standard run | Starting at $9/linear ft | Includes 5-inch or 6-inch seamless trough, standard hangers, and downspouts on a single-story run. |
| Standing seam with seam-clamp hangers | Starting at $14/linear ft | Clamps to the seam without piercing the panel, protecting the finish warranty on coastal-grade roofs. |
| Leaf protection and oversized trough | Starting at $16/linear ft | Adds a 6-inch or 7-inch trough plus hood or screen for heavy eucalyptus, palm, and bougainvillea litter. |
| Buried downspout and drainage line | On estimate | Needs an on-site look at slope, discharge point, and trench route before a number is given. |
| Travel | Included | In San Diego and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (619) 314-6401, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Commercial or agricultural roof inspection | Free estimate | On-site inspection with photos of failing fasteners, flashing, and panel condition, plus a written scope. |
| Exposed-fastener repair and re-fastening | Starting at $450 | Replacement of corroded screws and washers plus resealing of penetrations, priced by roof size and access. |
| Barn or outbuilding panel replacement | Starting at $1,200 | Targeted panel and closure replacement on ag buildings, with cost driven by panel count and roof pitch. |
| Full commercial or ag metal roof replacement | On estimate | Tear-off, deck and purlin review, insulation, panel system, and flashing require an on-site look before pricing. |
| Travel | Included | In San Diego and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (619) 314-6401, no obligation to book. |
Indicative rates, actual cost varies with project size, materials, and site access. Free personalized estimate within 24h.
Homeowners searching for a metal roofing contractor near me in San Diego want a crew that understands local roofs, not a call center. San Diego Metal Roofing is a professional metal roofing contractor serving San Diego and the surrounding areas, with a network of licensed, bonded, and insured local contractors who handle metal roof installation, replacement, re-roofs, and repairs on homes across the region. From the Spanish Colonial Revival homes of Mission Hills to the ranch properties of Ramona, we match the right metal system to the building, the climate, and the budget.
We work in San Diego, Chula Vista, Oceanside, Escondido, Carlsbad, and the neighborhoods in between. Coastal salt air and marine-layer fog attack fasteners and unprotected steel, while inland Santa Ana winds drive embers and debris into valleys and canyons. Whether your home sits on a canyon rim in Clairemont or a large lot in Fallbrook, we bring straight guidance and trade-level workmanship. Call (619) 314-6401 or request a free estimate to get started.
Metal roofs fail in predictable ways, and most leaks trace back to a handful of causes. On 15 to 30 year old exposed-fastener roofs, the number one culprit is fasteners backing out as the EPDM sealing washers dry, shrink, and crack under constant UV. Once the washer loses its seal, water finds the screw hole. Seams can separate as panels expand and contract with thermal movement, and pipe boots, chimney flashing, skylights, and valley flashing are common entry points when sealant ages out. Wind-lifted panels after a storm and punctures from fallen limbs are also frequent calls.
Ignoring a small leak is expensive. Water tracks along purlins and decking far from the entry point, so by the time you see a stain inside, the sheathing may already be rotted and insulation damaged. That is why we inspect the whole roof assembly, not just the wet spot. Our metal roof repair and metal roof leak repair services address the source, and a full screw replacement and re-fastening often restores a watertight roof for a fraction of replacement cost.
We will tell you plainly when a repair is the right call and when replacement makes more sense. If the panels are sound and the leaks come from fasteners and flashing, re-fastening and new boots can add years of service. If the metal is perforated or the deck is soft, we will say so. Call (619) 314-6401 or contact us to schedule an inspection.
We install the full range of metal roofing systems and match each one to the home. Standing seam metal roofing uses concealed clips and no exposed fasteners, making it the premium choice for coastal homes and high-visibility elevations. Corrugated and ribbed panel roofing is the economical workhorse for barns, workshops, carports, and outbuildings. Metal shingle roofing and stone-coated steel roofing suit homeowners who want a tile or shake look with metal performance, and copper and specialty metal roofing is ideal for porches, bay windows, and Spanish Colonial accents.
The honest comparison is simple: standing seam costs more upfront and has no exposed screws to maintain, while screw-down costs less and needs its fasteners serviced over its life. We also offer metal roof over shingles (retrofit) when the deck is sound, and full tear-off when it is not. For new construction or full replacement, see our metal roof installation and metal roof replacement services.
Metal roof costs in San Diego are typically quoted per square foot for installations, while repairs are often flat-rate. Price depends on the panel system and metal gauge, roof pitch and complexity, tear-off versus recover, decking condition, and access. Every roof is different, so we frame all figures as typical ranges and always confirm final pricing after inspecting the roof and site conditions. Some carriers may offer premium discounts for metal or impact-rated roofs, but that is between you and your insurer.
For a clearer picture of how systems compare, visit our pricing page, then request a free estimate or free roof inspection so we can give you honest numbers for your specific home.
If a storm damages your roof, we inspect and provide written documentation with photos that you may submit to your own insurer. We are not an insurance adjuster or agent, coverage decisions rest with your carrier, and we make no promise that a claim will be approved. On permits, a permit is commonly required for a full replacement, but requirements vary by city. In most jurisdictions, fees and inspection requirements differ, and recover over existing shingles may be limited by code. Historic district or HOA design review can also affect panel profile and color choices.
We keep the process transparent and defer to the local authority on all requirements. Requirements vary, always verify with the San Diego building or planning department before starting your project. For help understanding your options, contact us.
Ready to get started? San Diego Metal Roofing serves in San Diego and surrounding areas. Get your free, no-obligation estimate today.
Get a Free EstimateMetal Roofing in San Diego · Response within 24h · No commitment · ☎ (619) 314-6401
Your Free Quote Request