Serving the San Diego area  ·  (619) 314-6401  ·  Open Mon-Sun 7am-7pm
📞 (619) 314-6401 Free Quote

Metal Roofing in National City, CA (91950) · Local Professionals

San Diego Metal Roofing · Fast response in National City and the San Diego area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+232Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

National City is a working-class town with a lot of older housing stock, especially the 1920s and 1930s bungalows and post-war ranch homes that sit on flat blocks from Highland Avenue down toward the bay. The salt air off San Diego Bay and the nearly constant sun take a toll on aging shingle roofs, and that is where we come in.

Homeowners in the 91950 ZIP code call San Diego Metal Roofing because we know how this coastal climate attacks fasteners, flashing, and shingles. Whether you are near Kimball Park or off Plaza Boulevard, we can stop a leak or put on a metal roof that will outlast the next few decades of marine layer and Santa Ana winds.

Metal Roofing in National City (91950)

National City sits on coastal mesas and canyon edges that drain toward San Diego Bay, and that terrain matters for roofing. Many lots are tight, with narrow side yards and shared property lines, so staging materials and getting a crew safely onto the roof takes planning. The housing stock is a mix of older bungalows with low-pitched roofs, 1950s and 60s ranch homes, and some newer stucco subdivisions. Salt air from the bay corrodes fasteners and unprotected steel, and the marine layer keeps roofs damp in the morning before the afternoon sun bakes them. We see a lot of failed fasteners, separated seams, and flashing gaps on older roofs here, plus wind-lifted panels after a storm rolls through.

Our team has worked on metal roofs across San Diego County, from standing seam and stone-coated steel to corrugated panels on carports and outbuildings. In National City, we often recommend coastal-grade finishes and stainless fasteners to stand up to the salt air. We also handle the retrofit work that lets you put a metal roof over existing shingles when the code allows it, which can save time and money on these older homes.

Our services in National City

How a Job Works in National City

Step 1: You call us at (619) 314-6401 or request a free estimate online. We schedule an on-site assessment at your National City property, usually within a day or two. We inspect the roof, check the attic if accessible, look at flashing and fasteners, and talk with you about what you are seeing (leaks, loose panels, rust, or just age). You get a written estimate with options, no pressure.

Step 2: Once you approve, we pull the required permits from the local building department. National City has its own permit rules and inspection schedule, so we handle that coordination. On tight lots, we plan material delivery and staging to keep your driveway and neighbor access clear. If you are in an HOA or a historic district, we help with the design review paperwork for panel profile and color. The crew protects your landscaping and works in stages so your home is never left open to the weather.

Step 3: When the work is done, we clean up thoroughly. That means magnet sweeps for nails, hauling away old materials, and a final walkthrough with you to check the roof, gutters, and flashing. We do not leave until you are satisfied and the site is clean.

Pricing in National City depends on the size and pitch of your roof, access, the condition of the existing roof, and how soon you need it done. For a typical bungalow or ranch home here, metal roof installation starts around $8 per square foot, standing seam starts around $10, metal roof replacement starts around $9, and a retrofit over existing shingles starts around $7. If you just need a repair, metal roof repair and leak repair start at $450, screw replacement and re-fastening starts at $750, and flashing or chimney repair starts at $600. Corrugated panel roofing is the budget option at around $5.50 per square foot, while copper and specialty metals start around $20. We give free estimates, so call (619) 314-6401 and we will give you a straight answer for your specific roof.

My 1920s bungalow near Kimball Park has a low-pitched roof and original shingles. Can you install metal over them?
Possibly. National City code limits how many layers of shingles you can have before a full tear-off is required. We inspect the existing roof, check the decking, and tell you if a retrofit is allowed. If it is, we use a metal roof over shingles system that saves on dump fees and labor. If not, we recommend a full replacement with new underlayment.
A storm just blew some panels loose on my roof off Plaza Boulevard. How fast can you get out?
We prioritize storm and wind damage calls in National City. Call (619) 314-6401 and we will schedule an inspection, often same day or next day. We can secure loose panels, tarp active leaks, and give you a repair estimate on the spot. We do not promise insurance coverage, but we can document the damage for your claim.
What does a metal roof cost for a typical 1,200 square foot ranch home in National City?
For a home that size with a simple roof, you are looking at roughly $9,000 to $14,000 for a basic corrugated or R-panel roof, and $15,000 to $22,000 for standing seam, depending on pitch, access, and tear-off. Repairs are much less, starting at $450. We give free estimates so you get a real number for your roof.
Do I need a permit from the City of National City for a metal roof replacement?
Yes, a full replacement or re-roof typically requires a permit from the National City Building Department. Permit thresholds, fees, and inspection requirements vary, so we verify the current rules with the city before starting. We handle the permit application and inspections as part of the job.
My neighbor says my new metal roof will send water onto their property. What are the rules?
In California, you generally cannot redirect water onto a neighbor's property in a way that causes damage. We design gutters and downspouts to manage runoff on your own lot. If there is a property line dispute, we can suggest solutions like a shared drainage plan or a setback. For HOA approval, we help with the design review submittal for panel style and color.
Are you fully insured for work at my National City home?
Yes. We carry general liability insurance and workers' compensation coverage for every job.
What maintenance does a metal roof need in National City's salt air?
Salt air corrodes fasteners and unprotected steel, so we recommend an annual inspection, especially after winter rains. Check for loose screws, replace any that show rust, and keep gutters clear of debris. A coating every few years can extend the life of the finish. We offer free inspections and maintenance plans for National City homeowners.
Why choose us?

Trusted professionals in San Diego

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in San Diego

All your work handled by qualified professionals in San Diego

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

232+ Verified Client Reviews in San Diego

⭐⭐⭐⭐⭐ 4.9/5 · 232 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in San Diego · Response within 24h · No commitment · ☎ (619) 314-6401

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in San Diego ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm